Dual Head CT Injector C22

Technical specification
Electrical Requirements 220VAC/110VAC,50 or 60Hz,200VA Operation Interface Available in English, French, Spanish, German and Chinese Flow Rate 0.1-10 ml/sec. in increments of 0.1 ml/sec. Syringe Capacity 115m1 for Zenith-C11; 200m1 for Zenith-C22 Volume 0.1 ml to syringe capacity in 0.1 ml increments Pressure Preset limit: 300 psi default, user settable from 50 to 350 psi in 1 psi increments Display: Real-time pressure curve Change threshold: Stop injection if pressure changing suddenly Alarm: Voice alarm and stop injection when over preset limit Injection or Scan Delay 0 to 3599 seconds in 1 sec. increments Autofill Settable flow rate from 3 - 8m1/sec., volume from 10m1 to syringe capability Injection Capabilities Programmable up to 8 phases Pause Phase 0-999 sec. in 1 sec. increments Hold Capability 30 minutes max Storage Capabilities 1000 protocols Expel air locked Unable to inject unless expelling air Test injection Settable flow rate from 0.1 - 5m1/sec., volume from 0. 1m1 to 10m1 Heat maintainer 35-38°C(optional) Hand switch Hand switch control pause and continue injection (optional) Emergency stop function When the system is injecting, click on any point of the touch screen or any button on the injector arm, the system will stop injection Dual Flow Settable in a ratio of saline and contrast KVO Independent KVO program Dimension Injector Arm and Pedestal:L:22.8"(58.0cm),W:12.5(20.1cm),H:50.2"(127.4cm) Console:L:4.55"(11.55cm).W:12.68"(31.8cm),H:9.77"(24.81cm) Weight Injector Arm and Pedestal:19.5Kg Console:4.1Kg Thousands of Zenith contrast injection systems have been installed and are running well with imaging systems of all major manufacturers in the world, including GE, SIEMENS, PHILIPS, TOSHIBA, SHIMADZU, HITACHI, ANKE, UNITED IMAGING, SINOVISION, NEUSOFT, WANDONG, LONWIN etc.

Download Broucher